The polishing machine is a relatively complicated equipment, and it has many varieties, but no matter what kind of equipment, we need to pay more attention to some things in operation. For example, when using a CNC polishing machine, have you paid more attention? The wheels of the polishing machine turn to the object to be polished, and then run at full speed. Borrow buffing compound and put it on the edge of the wheel for a few seconds. This allows the polish to attach to the wheel. Then tightly attach the workpiece to the surface of the hub, making sure that the workpiece is placed on the horizontal plane of the central axis of the hub. If it doesn't, the wheels can easily throw the job aside.
1. You can lightly touch the wheel surface with the workpiece. This method may help to remove the sharp corners of the surface. You can add wax if necessary, but you must remember that too much of anything is not good.
2. The operation mentioned above is the operation of pressing the polishing wax onto the wheel. We must not use too much force. To allow the wheels to spin smoothly. After the polishing of Anhui Xinyida polishing machine is completed, the surface can be wiped with a soft cloth dipped in talcum powder. The wax must be removed, and dewaxing can be used if necessary.
3. What should I do if the above-mentioned overdose occurs? In the case of excessive wax, we can use professional tools to wipe it off. If the effect is not very satisfactory, reapply it.