Product introduction:
Polishing of the outer surface of the LNG cylinder barrel. The equipment is connected to the conveying line, andthe gas cylinder enters the loading mechanism of the barrel polishing machine through the conveying line. Thebarrel section is polished by the horizontal automatic passage mode, and the motor is directly connected to thereducer to drive the roller to rotate, thereby driving the barrel section to advance spirally. The polishing headadopts the electric screw to pre-adjust the upper and lower positions of the grinding head, and the manual screw isrequired to adjust the position of the driven wheel to adapt to the cylinder of different diameters. The grindinghead pre-presses the surface of the cylinder section through the constant pressure device, and the barrel section isspiraled. During the advancement process, the polishing head continuously grinds the surface of the barrel sectionthereby realizing the polishing function of the barrel section surface.
Product parameters
1.Input total power: 30Kw
2. Equipment dimensions: 9200 x 1500 x 1500 (L x W x H, in: mm)
3. Total equipment weight: 4500KG
4. Machining accuracy: surface roughness Ra s 0.3um (selection of polishing discs of different particle sizessuccessivelv reached)
5, Polishing materials are abrasive belts of various sizes, thousand impellers, wool throwing discs, nvlon discs, clotrdiscs. and etc
6. Can processing range: diameter 506-656mm, 800mm (reserved) length 2300mm, (with 2m each front and realrack). the maximum weiht of single workpiece is less than 300ko. the continuous surface of the outer surface oithe cvlinder is polished.
7. The conveying line speed is 8 m/min. The polishing machine is fully enclosed with a fully enclosure with atransparent glass window for easy viewing, repair or replacement of consumables. The equipment is equipped witha dust suction port and piping at each polishing station, and an optional vacuum cleaner.8. The pressure on the surface of the pre-pressed cylinder can be adiusted by the pressure requlating valve to suithe best polishing effect of the workpiece: the upper and lower lfing limit positions of the throwina head areprovided with electrical and mechanical protection.