Surface finish 15 = Ra 0.006 (mirror); Surface finish 14 = Ra 0.012 (fog mirror); Surface finish 13 grade = Ra 0.025 (mirror glossy surface); Surface finish 12 = Ra 0.050 (bright finish); Surface finish 11 grade = Ra 0.1 (dark gloss surface)；Surface...
Common problems and solutions in the grinding process of cylinder with abrasive belt
Abrasive belt deviation:1.The adjustment mechanism is not properly adjusted, the belt moves slowly in one direction and moves faster to the other side.The left and right oscillations of the belt should be balanced, and the belt centering device is use...
Both Stainless steel round tube polishing and electrolytic polishing can reach Ra≤0.4?
Mechanical polishing, to achieve 0.4 is no problem, mainly depends on the number of sandpaper, generally divided into several steps: rough polishing, fine polishing, electrolytic polishing is actually a physical effect, is the process of pickling....
Mechanical polishing, electrolytic polishing, chemical polishing - Introduction to several classifica
Mechanical polishing is a polishing method that removes the polished convex portion by plastic deformation on the surface of the material to obtain a smooth surface. Generally, oil stone strips, wool wheels, sandpaper, etc. are used, and manual operat...
Polishing mechanical assembly operation procedures
1.Obey the general fitter's safe operation procedures and strictly follow the common tools and equipment safety operation rules of the fitter.2. Place the assembled parts in order on the parts storage rack and assembly station. If the parts are transp...